wacsmodelthumbs displays thumbnails of models in the database. By default, this will display all the models in the database - this can be a lot of entries so there are many modifiers available to limit the results to something useful.

First up there are the flagged models - currently this consists of six categories: Cuties (C) defined as good looking models whose sets are not particularly explicit, Solo (S) models mostly selected for good solo sets, Lesbian (L) those who have particularly good lesbian sets, Straight (F) models who have particularly good straight sets, Featured Models (M) for those who are currently being highlighted for one reason or another and Placeholders (P) used to hide pseudo-model entries that may be convenient for download purposes (for instance a group combination) but aren't real identifiable single models. For each of these, just provide the appropriate capital letter when calling wacsmodelthumbs, for instance use wacsmodelthumbs/C for Cuties, and wacsmodelthumbs/L for Lesbian sets.

Next up is the vendor search mechanism. Here it is assumed that you've utilitised the idmap facility and have allocated an appropriate abrieviation to each source of material. So if for instance you've marked models from Sapphic Erotica (www.sapphicerotica.com) with an IDMap flag of SE, the following examples would apply. To see all models with content from Sapphic Erotica, you would call wacsmodelthumbs with wacsmodelthumbs/V=SE where V stands for vendor. You can further select just those models to whom you've given a top rating, ie a mrating value of 4 or 5, using the Q (for Quality) selector. Thus wacsmodelthumbs/Q=SE will select only your top rated models from vendor SE. Another vendor based selector is connected to the download mechanism - N - selects models who have had new sets added within the last three months (as determined by the refresh and chkmodel commands on their last run). Thus wacsmodelthumbs/N=AMK will select only those models updated within the last three months. A companion to this is the D (for Dormant) selector: this selects those models who have not been active within the last three months. Thus wacsmodelthumbs/D=KPC will select all Karup's PC (KPC) models who have not had new sets added in the last three months.

The final two vendor search options are designed to help with maintenance of the system and shows those models from a given vendor who have not yet been rated or who have incomplete identification to be selected. The U (for Unclassified) selector finds models with sets from this vendor who have no specified rating, it is used like this: wacsmodelthumbs/U=SE. The X (for Incomplete) selector finds models flagged as coming from this site but where we have no key or last checked information for them. You can look for models with incomplete ids with wacsmodelthumbs/X=KHA which will find models from Karup's Hometown Amateurs (KHA) with incomplete information.

Next is the Alpha-search mechanism, used typically for doing pages for a given letter of the alphabet, but quite capable of being even more selective if required. For an index of models with names beginning with H, you would call wacsmodelthumbs with wacsmodelthumbs/A=H. When using the Alpha search mode (A=), there will be a row of links for each letter of the alphabet along the top of the page, just below the normal hot item links. If you want to search for all models begining with Bet for example, you can do wacsmodelthumbs/A=Bet and it'll find Beth, Betsy, Betty, etc. It will also find models with an alias of Betty or an identity record for a site with a name of Betty ^[1]. If for example you have the prolific Hungarian model Zafira in your system, Zafira will appear in a search for Betty as she's called Betty 2 on Karup's PC. This can be a little confusing at first, but is actually very useful when you've figured out what is actually going on.

	Note
	The search for aliases and idmap names is only enabled if you give two or more characters in the search, the wacsmodelthumbs/A=B will not include Zafira as that is trying to produce a straight forward alphabetic index. Search for wacsmodelthumbs/A=Be and alias and identity map names will be included, and in this example Zafira will be included in the results.

Finally you can get wacsmodelthumbs to display an index of models in a model based tag set by using the T option. For example, to display the members of tag set 595 (which must be a tag set of models, not sets), you would call wacsmodelsthumbs with wacsmodelthumbs/T595. In summary, the options are:

wacsmodelthumbs is capable of colour-coding the names of the various models to show key aspects of their status and ratings - this is enabled or disabled by the indexcolours directive in the configuration file. When enabled, (indexcolours = Y), it will colour model's names as follows: green - rating of 4 or 5 (ie a high rating), amber - rating of 3 (a medium rating), magenta rating of 1 or 2 (a low rating). Models with no sets yet unpacked will be coloured blue. Black signifies all others - typically some sets but no rating.

wacsmodelindex displays a detailed index of models. This displays a far more comprehensive index of each matching model's details and includes most of the information in the database reformatted into sensible sentances (mostly!). It gives details on age, country of origin, shows any notes, and lists the number of outstanding sets/videos yet to be downloaded and already downloaded but not catalogued. It's a highly extended version of wacsmodelthumbs and accepts all of the same optional selection parameters listed above.

wacsmodelpage displays a model's portfolio and exists in four different versions all of which share common code and display differing amounts of detail. We will start with the third version out of the four in order of ascending amounts of detail. In this form, the command is called wacsmodelpage which is also it's generic name.

This is the main page for looking at model's work; it has a heading section at the top with the big icon and a selection of attributes about her and navigation bar. Below it has a box of information including the icon, attributes and size for each set and video of hers that we have. Normally wacsmodelpage is invoked with our model number for a model, for instance wacsmodelpage/147 would retrieve the page for our model 147. However, if the model number concerned is not found, the key given is also tried for any idmap keys that might match. This is not very useful for sites which started their own model numbers from a low number, but works very well for keys from sites such as those from the AMKingdom group who have a really good alpha-numeric reference scheme. In this scheme, a model called Karlie is kar042, a model called Sabrina is sab001, and so on the numbers incrementing sequentially for each new model with that three letter prefix. It also works for sites such as how Karup's PC used to be ^[2] where the model key is her name followed by a number, thus for a model with key bailey_(2) you can use that (complete with brackets of course).

There are currently nine groups of modifiers on the behaviour of wacsmodelpage. By default, if a prefexcl attribute exists within the access control list file (see Chapter 12, Security) for the current host/user combination, this will be applied to the search of the models portfolio. When this mode is enabled a warning and link is added in the page heading. To disable the preference exclusions (prefexcl) mode for model 123, you call wacsmodelpage with a /N appended to the URL, as in wacsmodelpage/123/N. This functionality is all suppressed if the prefexcl flag is not set for the current user.

The second modifier allows the copying of all of this model's sets to a tag index, to add model 123's sets to tag set 456, you call wacsmodelpage with wacsmodelpage/123/T456. All of these options work for idmap based key searches too, so if you want Erika's (from AMK) sets added to the tag set, you can do wacsmodelpage/eri046/T456 . You can also specify that a tag set should be created with the next available tag set number by using /Tnext as in wacsmodelpage/eri046/Tnext. In addition to the T option which tags both Image and Video sets, there is also an I option which tags only the image sets, as in wacsmodelpage/123/I456 or wacsmodelpage/123/Inext. The V option has the corresponding effect but for video files instead of image sets.

The third option allows you to display only those sets by a specific photographer, this is done with the /P= option. This might be used as in wacsmodelpage/123/P=BMB to select only those sets by model no 123 that were shot by photographer BMB (this cancels out the preference exclusion feature, intentionally). The fourth option is similar to the third, and appears under the same pulldown menu and selects the foundry from which the sets came. It is available from Wacs 0.8.6 onwards. This is specified with the S (for source) option as in wacsmodelpage/123/S=pinkmetallic - this is not required to be in the vendors database, but the printable name will be used in descriptions if it is found. This does not cancel the preference exclusions although you could always use /N on the end to do so.

The fifth option allows you to display only those sets featuring a lesbian liason between the main model and a second specified model, so if for instance you wanted to see those sets where model 9 goes with model 15, you would do wacsmodelpage/9/L=15.

The next two options relate to attributes of the sets and do not cancel the preference exclusions. The sixth option R (for Room) is to select sets and videos only in a specified location, done with the /R= option. If you want to select sets in the bathroom only, you would do wacsmodelpage/204/R=Bathroom . The seventh option A (for Attire) is to select sets and videos where the model is wearing the specified type of Attire. For instance if you want only sets featuring Swimwear, you would do wacsmodelpage/147/A=Swimwear; for school-themed clothing like cheerleader or schoolgirl you would use wacsmodelpage/147/A=Schoolwear.

The eighth option F (for Flag) is to select sets and videos only with the specified set type, done with the /F= option. If you want to select Lesbian sets only, you would do wacsmodelpage/1080/F=L ; for toys, you would use wacsmodelpage/1080/F=T. This option does override the preference exclusions; if you ask for a type you've excluded it would be pointless not to show it to you.

The ninth option O (for Official) simply tells the model page to use the official icon in preference to the standard first image one where both are available.

	Note
	If the preference exclusions (prefexcl) feature is active, it will be applied to the tag set creation, so only the preferred types of sets will be tagged. At the moment the modifiers are mutually exclusive with the exception of the /N and /O and tagging options which should be usable with any other combination.

wacsmpfull is the most detailed and verbose of all the model page varients displaying information about download records, previous identities, and so on. It also tries to display all we know about a given model's sets. As before, it supports all of the same features as the main wacsmodelpage.

wacsmpthumbs displays a model's portfolio in a smaller, more condensed table layout. It is actually wacsmodelpage with a different global option set; all the same features are included. Preference exclusions, the /N override and the /Ttagno, /P=photog, and /L=modelno and other modifiers are all fully supported.

wacsmpmini displays really small thumbnails for those models with huge numbers of sets. As with wacsmpthumbs this is again wacsmodelpage with a different global option set, so the same options and features are supported.